The BE Pressure B4213HABGS is a 4,000 PSI, 4.0 GPM cold-water gas pressure washer built for operators who run a machine hard every day. A commercial Honda GX390 engine drives a belt-driven General triplex pump, a combination that lets the pump turn at lower RPM so it runs cooler and lasts longer than a comparable direct-drive unit. Mounted on a corrosion-resistant aluminum frame with 12-inch flat-free tires, it is made to be wheeled across job sites and put to work.
Build quality is where this machine earns its keep. The General triplex pump uses a reinforced body, forged brass manifold, solid ceramic plungers, stainless steel check valves, and a thermal release valve, so it shrugs off the heat and pressure cycling that wears out lighter pumps. The external unloader can be set to a dump-to-ground bypass that keeps water moving and the pump cool during pauses, which is exactly the kind of detail that keeps a contractor working instead of waiting on a cooldown.
Use cases
At 4,000 PSI and 4.0 GPM, this is a workhorse for crews that need to clean large, stubborn surfaces quickly rather than a homeowner-grade unit. Typical jobs include:
- Pressure washing contractors cleaning concrete, driveways, sidewalks, and building exteriors
- Fleet and heavy-equipment washing where consistent flow and pressure shorten cleaning time
- Agricultural and municipal crews that need an all-day machine on rough terrain
- Surface-cleaner work when paired with a flat-surface attachment for parking decks and lots
Specifications
- GPM: 4.0
- Engine: Honda GX390
- PSI: 4000
- Pump: General TS1511
- CC: 389cc
Frequently asked questions
Is the B4213HABGS belt drive or direct drive?
It uses a belt-drive system. The belt lets the General triplex pump run at lower RPM, which lowers heat and vibration and extends pump life compared to a direct-drive pump turning at engine speed.
What pump does it use?
An industrial General triplex pump with a forged brass manifold, solid ceramic plungers, stainless steel check valves, and a thermal release valve. An external unloader adds cooling and can be set to dump bypass water to ground.
Is this a hot or cold water pressure washer?
It is a cold-water machine. For melting grease and oil, look at a hot-water unit such as the BE HW4013HG.
Does it come ready to use?
Yes. Industrial-grade accessories are included so you can start working right away, and the frame includes onboard storage for those accessories.
Discount Cleaning Products is an authorized BE Power Equipment dealer, and our US-based team can help you match the right pump, nozzles, and accessories to your workload. Every machine ships with full manufacturer warranty support.
