Every truckmount and portable extractor pulls more than water off a carpet. Sand, grit, hair, staples, carpet fiber and whatever else is in the pile all travel up the vacuum hose toward the recovery tank and, eventually, toward the blower. The Hydro-Force AC10 inline waste filter is the clear canister that catches that material mid-line, and the AC10C is the replacement screen that does the actual work inside it.
This listing is the screen only. The AC10 housing, lid and seal are not included. If you need the complete inline filter assembly rather than the wear element, ask us for the full AC10 unit instead.
Built for
- Carpet cleaning route work. Owner-operators and truckmount crews who run the same line every day and go through screens as a consumable.
- Water damage and restoration. Extraction on loss jobs picks up debris that no residential carpet ever contains, which is exactly when an inline filter earns its keep.
- Replacing a failed screen. Crushed, torn, permanently clogged, or on older units simply rusted through.
- Rental and equipment fleets. A screen is the cheapest serviceable part in the vacuum path and the easiest one to swap between renters.
Why the screen is worth replacing on schedule
A vacuum blower is one of the most expensive components on an extractor, and solids are what kill it. Running a good screen is deliberately sacrificing a low-cost part to protect a high-cost one. Beyond blower protection, keeping debris out of the recovery tank means less time spent scraping out sludge at the end of a route and fewer clogs at the tank inlet.
The stainless construction matters more than it sounds. This element lives in a line that is wet all day, every day. Older and lesser screens corrode in that environment and then fail structurally - the part deforms, opens a bypass path, and stops filtering while still looking installed.
Field practice
The recurring advice from working operators is simple and consistent: an inline filter only costs you airflow if you let it clog. Rinse the screen out between jobs, or at minimum at the end of each day, and the airflow penalty stays negligible. Skip that and the same screen that was protecting your blower becomes the restriction in your line. Operators who pre-vacuum thoroughly report they can go longer between cleanouts, because most of the dry soil never enters the hose in the first place.
Specifications
- Type: replacement screen element for inline waste filter
- Fits: Hydro-Force AC10 inline waste filter housing
- Part number: AC10C
- Cross-references: 1668-0694, 109668
- Material: stainless steel mesh
- Line size: for AC10 units on 2-inch vacuum hose connections
- Brand: Hydro-Force
Frequently asked questions
Does this include the filter housing?
No. This is the replacement screen element only. The clear housing, lid and seal are sold as the complete AC10 inline waste filter.
Will an inline filter cost me suction?
Not meaningfully if you keep it clean. Operators who rinse the screen between jobs report no practical loss. A screen that is allowed to pack with debris will restrict the line.
Will the screen rust?
No. It is stainless steel, which is why it survives a vacuum line that stays wet.
What equipment does it work with?
Any truckmount or portable extractor running the Hydro-Force AC10 inline waste filter on a 2-inch vacuum line.
How often should I replace it?
There is no published replacement interval. Replace it when the mesh is torn or deformed, or when cleaning no longer restores airflow. Clean it between jobs in normal use.
Do I still need to pre-vacuum if I run an inline filter?
Yes. Pre-vacuuming removes dry soil before it ever enters the hose. The inline filter catches what gets past that, not what replaces it.
Discount Cleaning Products is an authorized dealer for the vacuum and floor care brands we carry, with US-based support from people who work on this equipment every day. If you are not certain this part matches your machine, send us your model number and serial plate details and we will confirm the fit before you order.