HydraMaster BLITZ Pre-spray w/Greasebreaker Heavy Duty Powdered Carpet Pre-Spray, 4 X 6.5# jar case, 950-146-B

HydraMaster BLITZ with GreaseBreaker heavy duty powdered carpet pre-spray, case of four 6.5 lb jars, for greasy commercial carpet
 
📊 AI MARKET SNAPSHOT
Best For: Carpet cleaning crews facing heavily soiled, greasy carpet who need a powdered pre-spray that breaks down grime fast without long dwell times.
Highlight: HydraMaster's BLITZ combines the GreaseBreaker solvent booster with alkaline cleaning agents to dissolve and emulsify heavy soil in a non-enzyme formula.
Expert Note: Because BLITZ skips the enzyme route, it works on grimy traffic lanes without the long dwell times enzyme pre-sprays require, and the 4 x 6.5 lb jar case keeps a crew stocked for a full route.
Sale Price: $220.60
Estimated Shipping Cost: $11.25


Free Shipping
Product Code: 950-146-B
Quantity:

Description Reviews FAQ
 

When you walk into a restaurant dining room or an apartment that has not been cleaned in three years, a standard pre-spray is not going to move the soil. HydraMaster BLITZ with GreaseBreaker is the powdered heavy-duty pre-spray carpet cleaning contractors reach for when the carpet is packed with cooking grease, oxidized oil, and ground-in traffic-lane grime. It is a non-enzyme formula, which means it goes to work on contact instead of forcing your crew to stand around waiting out a long dwell time.

BLITZ builds HydraMaster's GreaseBreaker solvent booster directly into a blend of alkaline cleaning agents and builders. That matters on a job site: there is no second additive to buy, measure, or forget when you hit a heavy section. One product handles the whole floor.

Built for these jobs

  • Restaurant, bar, and break-room carpet loaded with airborne cooking grease, where an ordinary pre-spray leaves grey traffic lanes behind.
  • Apartment turnovers and neglected rental units that are being restored rather than maintained.
  • Winter salt and slush grime tracked into commercial entryways and corridors.
  • High-traffic retail and office lanes that have gone too long between cleanings.
  • Heavily soiled synthetic commercial carpet where production speed matters as much as cleaning power.

Why contractors switch to a powdered pre-spray

A powder super-concentrate changes the economics of your truck. You are not paying to ship or store water, and a case fits under a van seat instead of eating pail space. BLITZ dissolves quickly and completely, so it will not leave grit behind to clog an in-line injection sprayer tip. Mix it at 2 oz of powder per gallon of hot water in a pump-up sprayer, or 10 oz per 5 quarts of hot water in an in-line injection sprayer, then let it dwell 3 to 5 minutes without allowing it to dry.

Important fiber note: BLITZ is a high-alkaline product with a ready-to-use pH of 12.0 to 12.5. It is formulated for synthetic commercial carpet and extremely soiled synthetic residential carpet. It is not the right choice for well-maintained, stain-resist warranted residential carpet. Always pre-test an inconspicuous area for colorfastness and follow with a compatible acid or neutralizing rinse.

Specifications

  • Product type: Heavy-duty powdered carpet pre-spray and traffic lane cleaner
  • Pack: Case of 4 x 6.5 lb jars
  • Ready-to-use pH: 12.0 to 12.5
  • Dilution, pump-up sprayer: 2 oz powder per gallon of hot water
  • Dilution, in-line injection sprayer: 10 oz per 5 quarts of hot water
  • Dwell time: 3 to 5 minutes; do not allow to dry
  • Chemistry: Non-enzyme alkaline builders with GreaseBreaker solvent booster
  • Fragrance: Citrus
  • Recommended for: Synthetic commercial carpet and heavily soiled synthetic residential carpet

Frequently asked questions

How much BLITZ do I mix per gallon?

Use 2 oz of powder per gallon of hot water in a pump-up sprayer. For a standard in-line injection sprayer, mix 10 oz per 5 quarts of hot water. Shake or stir well until fully dissolved.

Do I need to add a separate degreaser for restaurant grease?

No. GreaseBreaker is already built into the BLITZ formula, so no additional booster is required even on heavily greased commercial carpet.

Can I use BLITZ on residential carpet?

Only on extremely soiled or neglected synthetic residential carpet. At a ready-to-use pH of 12.0 to 12.5 it is not designed for well-maintained, stain-resist warranted carpet. Pre-test for colorfastness first and rinse with a compatible acid or neutralizing rinse.

How long should it dwell?

Three to five minutes. Do not let the solution dry on the fiber. If it starts to dry, re-wet with your wand rather than applying more product.

Will the powder clog my injection sprayer?

BLITZ is formulated to dissolve completely so it will not leave grit that clogs sprayer tips. Mix with hot water and agitate until fully dissolved.

Is BLITZ an enzyme pre-spray?

No. It is a non-enzyme formula, which is why it does not require the long dwell times that enzyme pre-sprays need to break down soil.

Buy with confidence from Discount Cleaning Products

Discount Cleaning Products is an authorized HydraMaster dealer. Our US-based team works with these products every day, so if you need help matching a model, a size, or a replacement part to the job in front of you, you can talk to someone who actually knows the equipment. Genuine HydraMaster stock, real product support, and honest answers about what a product will and will not do.

Features
  • Dissolves and emulsifies heavy grease, oxidized oil, and ground-in traffic lane soil
  • Works on contact as a non-enzyme formula, eliminating long enzyme dwell times
  • Includes the GreaseBreaker solvent booster built in, so no second additive is needed
  • Mixes at 2 oz per gallon, yielding a low cost per ready-to-use gallon
  • Dissolves completely in hot water without leaving grit that clogs injection sprayer tips
  • Ships as a powder super-concentrate, cutting freight weight and van storage space
  • Formulated for synthetic commercial carpet, restaurant floors, and apartment turnovers



Sandia 60-0033 Force 14 LED Cover $6.92
MK Diamond MK-915D 8" Premium Grade Blade for Hard Materials, Masonry Blade # 153313 $75.99
EDCO 77142 Rear Rubber Seal Skirt 2-EC/GC $9.60
Edco 73400 CPU-10FC Self Propelled Scarifier, Gasoline, 20 HP Honda $13,798.24
Sandia Spot-Xtract 3-Gallon Spot Extractor - No Hoses, No Hand Tool - Machine Only - 55 psi Pump, 100 CFM, 804 watt, 2-Stage Motor, 50-1002 $535.95
BE Pressure WHIRL-A-WAY 30" SS 4-IN-1, 85.403.030 - Discontinued $1,350.00
EDCO 15190 Choke Kit for 11HP Vertical Shaft Honda Engine $46.18
Simpson Monster Cold Water Hose # 41028 $84.99
MK Diamond MK-525 14" (356mm) Supreme Grade for Cured Concrete , Concrete Blade # 134940 $281.99