The Sandia 80-0016 is a complete 500 PSI replacement pump for Sandia Sniper 6-gallon and 12-gallon carpet and hard-surface extractors. It is the genuine Sandia assembly carpet-cleaning and restoration technicians reach for when a machine starts losing spray pressure, leaks, or stops priming -- restoring the full 500 PSI solution flow that gives the wand its cleaning power.
Spray pressure is the heart of an extractor's performance. As a pump wears, pressure drops, rinse-and-extract results fade, and dry times climb. Swapping in a fresh 500 PSI pump brings the machine back to factory spec instead of leaving it underperforming on the job or sidelined waiting for a repair shop.
Built for
- Restoring lost spray pressure: bring a Sniper extractor back to its full 500 PSI output.
- Replacing a failed or leaking pump: a direct complete-assembly swap to get a machine back in service.
- Planned maintenance: refresh a high-hours pump before it fails on a job.
- Keeping a spare on the shelf: minimize downtime for owner-operators who can't afford a machine out of service.
Why technicians choose the genuine Sandia pump
Because it is the complete pump assembly built for the Sniper platform, the 80-0016 drops into the 6-gallon and 12-gallon extractors it was designed for without the fit-and-pressure guesswork of a generic substitute. Matching the factory 500 PSI rating means the wand sprays at the pressure the machine was engineered around, so cleaning results and dry times return to normal. It is backed by a 1-year warranty.
Specifications
- Type: complete replacement pump assembly
- Pressure rating: 500 PSI
- Fits: Sandia Sniper 6-gallon and 12-gallon extractors
- Part type: genuine Sandia OEM component
- Warranty: 1 year
If you only need the pressure regulator rather than the full pump, Sandia offers the 80-0016-REG separately -- reach out if you are unsure which part your machine needs.
Frequently asked questions
Which machines does the 80-0016 pump fit?
It is the 500 PSI pump for Sandia Sniper 6-gallon and 12-gallon carpet and hard-surface extractors. If your machine uses a different pressure rating -- for example a 1200 PSI hard-surface unit -- it takes a different pump, so confirm your model before ordering.
How do I know my pump needs replacing?
Common signs are dropping or weak spray pressure, the pump failing to prime, visible leaks, or unusual noise. If cleaning results have faded and dry times have crept up even after checking your jets, filters, and solution lines, a worn pump is a likely cause.
Is this the complete pump or just the regulator?
The 80-0016 is the complete pump assembly. If you only need the pressure regulator, Sandia offers the 80-0016-REG as a separate part. We can help you determine which one your repair calls for.
Is it a genuine Sandia part?
Yes. It is the genuine Sandia component matched to the Sniper extractor, so it fits and delivers the factory 500 PSI rating without the compatibility risk of a generic pump.
Will replacing the pump restore my machine's cleaning power?
If low or lost spray pressure was the problem, restoring the pump to a fresh 500 PSI assembly brings the wand back to full output and returns cleaning and dry-time performance to factory spec.
Discount Cleaning Products is an authorized Sandia dealer with US-based customer service to help you confirm the right pump, regulator, and parts for your extractor.
