The Hot2Go SH40004HH is a professional hot-water gas pressure washer built for contractors who clean where there is no electrical power and where cold water simply will not cut it. Combining 4000 PSI and 3.5 GPM with water heated up to 250 degrees F and a steam mode, it tackles baked-on grease, oil and grime that a cold-water machine would only push around.
Hot water lowers the surface tension of the water and accelerates the chemical action of detergents, so you break down grease and oil faster, use less soap and finish jobs in less time. That makes this machine a strong fit for fleet washing, heavy equipment, food-processing floors, agricultural cleanup and industrial maintenance.
Built for
- Degreasing engines, fleet vehicles and heavy equipment
- Food-processing and commercial kitchen floors that need hot-water sanitizing
- Agricultural, oilfield and industrial maintenance away from electrical hookups
- Steam cleaning of stubborn grease, gum and adhesives
The electric-start 389cc Honda engine powers both the pump and a thermostatically controlled 12 VDC Beckett burner, and a 20 amp charging circuit keeps the battery topped off. A stainless-steel-wrapped 1/2-inch SCH 80 steel coil heats the water, while a down-stream injector gives you hot soap control right from the gun. The large 8.0 gallon fuel tank means long burner run time between fill-ups, and the rugged powder-coated frame with a lift point, integrated hose hooks and a pneumatic wheel kit makes the machine easy to move and rig.
Specifications
- Pressure and flow: 4000 PSI at 3.5 GPM
- Max temperature: up to 250 degrees F, with steam capability
- Engine: electric-start 389cc Honda with 20 amp charging circuit
- Burner: thermostatically controlled 12 VDC Beckett
- Coil: stainless-steel-wrapped 1/2-inch SCH 80 steel
- Fuel tank: 8.0 gallons
- Included: gun and wand, 50-foot high-pressure hose, quick-connect nozzles, down-stream injector and adjustable thermostat
Note: Direct water feed only machine. Requires a group 24 550 CCA battery, not included. If shipping into Texas, a Texas resale certificate is required.
Discount Cleaning Products is an authorized Hot2Go dealer backed by US-based customer service. Have a question about coil life, burner fuel or the right nozzles for your work? Contact us and we will help you get set up.
Frequently asked questions
What is the advantage of a hot-water pressure washer over a cold-water model?
Hot water reduces the water's surface tension and speeds up detergent action, so it cuts through grease and oil far faster than cold water. You clean in less time and typically use less soap, which is why hot-water machines are preferred for degreasing and sanitizing.
Does the SH40004HH produce steam?
Yes. It heats water up to 250 degrees F and offers a steam mode for the toughest grease, gum and adhesive removal.
Does it need to be plugged into an outlet?
No. The unit is powered by an electric-start Honda gas engine, so it runs where there is no electrical power. It does require a group 24 550 CCA battery for starting, which is not included.
Can I run it off a tank instead of a hose?
No. This is a direct water feed only machine and should be connected to a pressurized water supply, not drawn from a holding tank.
