Carpet cleaning technicians running a Hydro-Force injection sprayer wand rely on this 5 quart AS68A bottle to keep pretreat chemical flowing from job to job. Hydro-Force injection systems draw concentrate from the bottle and mix it into the machine's high-pressure water flow at roughly a 1-to-8 ratio, so a full 5 quart fill covers a lot of ground across pretreat, deodorizer, and protector applications. Built for carpet cleaning pros and truckmount operators, the rotomolded container holds enough concentrate to get through several rooms before a refill is needed, and the large side-fill port lets you top off mid-job without pulling the injector assembly apart. Ships as a complete bottle assembly with cap and tether.
Use Cases
- Pretreat application - mix and inject carpet prespray through the wand ahead of extraction
- Spot and traffic-lane treatment - dial in concentrate for heavily soiled areas on residential and commercial jobs
- Upholstery and tile/grout spraying - run deodorizers, sanitizers, tile and grout cleaners, or fabric protectors through the same injection wand
- Mid-job refills - top off chemical through the side-fill port without disconnecting the injector
- Bottle replacement - swap out a cracked, clouded, or leaking bottle on an existing Hydro-Force injection sprayer wand
Specifications
- Hydro-Force Injection Sprayer Bottle
- 5 quart bottle with side-fill port
- Complete bottle assembly with cap and tether
- 5 quart rotomolded container
- Quart markings molded in for easy measurement
- Transparent container lets you see how much chemical is left
- Large side-fill port - refill without removing the injector assembly
- Wand holder keeps your wand off the customer's floor
- Recessed handle
Compatible replacement parts:
- AS68L - cap only, for 5 quart Hydro-Force bottle (side port)
- AS69A - tether only, for 5 quart Hydro-Force bottle (cap retainer)
- PCU01 - gasket, 1.375 x 2.000 x .100, for cap AS68L
Frequently Asked Questions
How much chemical does the AS68A bottle hold?
The bottle holds 5 quarts and has quart markings molded into the side for easy measurement while you fill.
Can I refill the bottle without taking the sprayer apart?
Yes. The side-fill port is large enough to top off chemical mid-job without removing the injector assembly from the wand.
What's the difference between the cap and the tether?
The AS68A ships as a complete assembly - bottle, cap, and tether. If you only need a replacement, the cap is sold separately as AS68L and the tether as AS69A; the cap gasket is PCU01.
Will this bottle fit any Hydro-Force injection sprayer?
It is built for Hydro-Force injection sprayer wands that use the side-port bottle design. Check your wand model before ordering to confirm it uses this bottle style.
What chemicals can I run through this bottle?
Techs use it for carpet presprays, deodorizers, sanitizers, tile and grout cleaners, and fabric protectors - any concentrate typically run through a Hydro-Force injection sprayer.
Discount Cleaning Products stocks genuine Hydro-Force replacement parts for carpet cleaning pros, including the AS68L cap, AS69A tether, and PCU01 gasket, so you can keep an injection sprayer wand in service instead of waiting on a full sprayer replacement.
