Mercury AM-4 1/2 HP, 3-Speed Air Mover # 90-2000


Mercury AM-4 1/2 HP 3-speed air mover, product code 90-2000, for water damage restoration drying
 
📊 AI MARKET SNAPSHOT
Best For: restoration and cleaning crews drying carpets and floors after extraction or water damage.
Highlight: the Mercury AM-4 air mover packs a 1/2 HP, 3-speed motor for adjustable high-velocity drying airflow.
Expert Note: stackable and lightweight, multiple AM-4 units can be daisy-chained to dry large areas faster after a cleaning job.
Sale Price: $265.00
Estimated Shipping Cost: Free Shipping Item


Product Code: 90-2000
Quantity:

Description Reviews FAQ
 

This Mercury AM-4 air mover accelerates carpet, pad, and subfloor drying after water extraction, cutting typical dry times from 12-24 hours down to as little as 2-4 hours. Its 1/2 HP motor and 10-inch galvanized steel fan push 1,500 CFM across 3 speeds and 3 tilt angles, so one unit can direct airflow across a floor, up a wall, or onto an elevated surface without extra hardware. Restoration crews and carpet cleaning teams stock these by the truckload because they stack for transport and daisy-chain 5-7 units off a single outlet.

Built for

  • Structural drying after water damage or flood extraction jobs
  • Post-cleaning carpet and upholstery drying on routine commercial carpet cleaning jobs
  • Water-damage restoration contractors and commercial carpet-cleaning crews running truck-stock, multi-unit fleets

Specifications

  • 1/2 HP, 115V motor, 1,150 RPM
  • 1,500 CFM airflow
  • 3 speeds, 3 tilt angles
  • 10-inch galvanized steel fan with intake/outlet finger-guard screens
  • GFCI-compatible, daisy-chain capable (5-7 units per outlet)
  • 20 ft 16/3 power cord, stackable housing

Frequently asked questions

How many air movers can I run off one outlet?

These units are designed to daisy-chain, typically allowing 5-7 units to run off a single 15-amp outlet when used with a GFCI connection.

Can I stack these in my van or trailer?

Yes -- the housing is designed to stack, which saves significant cargo space compared to non-stacking air mover designs.

How does 1,500 CFM compare to other 1/2 HP units?

1,500 CFM is a strong airflow figure for a 1/2 HP motor in this class, which is why these units are a common choice for restoration fleets.

Is this loud enough to bother occupants during an occupied job?

Like most commercial air movers, these units generate meaningful fan noise. Plan placement and speed settings accordingly on occupied jobs.

Do I need a dehumidifier in addition to air movers?

Air movers accelerate evaporation from wet surfaces, while a dehumidifier removes that moisture from the air. Most structural drying jobs use both together for faster, more complete drying.

This is an authorized Mercury part sold by Discount Cleaning Products, with US-based customer service for restoration and carpet cleaning contractors.

Features
  • Delivers 1,500 CFM airflow from a 1/2 HP, 115V motor
  • 3 speeds and 3 tilt angles for floor, wall, or elevated drying
  • Daisy-chains 5-7 units off a single outlet
  • Stackable housing saves cargo space in a service van or trailer
  • Cuts carpet and subfloor drying time from 12-24 hours to 2-4 hours
  • Galvanized steel fan with finger-guard screens for durability



$26.70
MK Diamond MK-440R 20" (508mm) x .125" Supreme Grade Wet Cutting Refractory Blade for Super Duty Hard Brick, Masonry Blade # 136499 $708.99
Air-Care 16x20x1" Silver 88% Electrostatic Permanent Washable Filter $82.50
MK Diamond MK-7502 30" Wide Notch Pro Blade For Cured Concrete, Concrete Blade # 169906 $1,528.99
Bissell 14" Heavy Duty Upright Vacuum, with On-Board Tools $589.75
General Equipment Ventilation Fan, 42D, .5HP, 115VAC, 60HZ, EBF42 $815.90
BE Pressure B4013HGS Pressure Washer 4000 psi 389cc Honda Gas Cold, B4013HGS $1,160.43
EDCO 97312 Tilting - Hand Held Drill Stand $868.56
Edco 40070-C 44" Thru 48" (use "B" Adapter) C-3C, Combo blade, 8" x 18", Conventional $25.63