The BE Pressure B2765HC is a 2700 PSI, 3.0 GPM cold-water gas pressure washer built around a 196cc Honda GX200 engine and a Comet triplex pump on a powder-coated steel B-Frame. This is the most-purchased size in BE's lineup for a reason: it is the practical sweet spot between a hardware-store consumer unit and a 4000 PSI commercial machine, and it pairs the right size pump with a serviceable engine that survives real use.
Built for
- Side-business and small contractor work - house wash, deck and fence cleaning, driveway and walkway, gutter cleaning. The 3.0 GPM flow is what makes a difference here; PSI gets the soil off, GPM rinses it down the driveway.
- Property maintenance - HOAs, apartment owners, and commercial property managers who keep one washer for in-house cleanup of common areas and dumpster pads.
- Auto and fleet detail - cars, trailers, ATVs, marine. 2700 PSI is firm enough to break crusted brake dust and bug splatter; 3.0 GPM rinses suds without water-spotting.
- Light commercial concrete - sidewalks, gas station pads, restaurant patios. Pair with a 16-inch surface cleaner and the productive rate triples versus wand-only work.
- Farm and ranch - equipment wash, livestock trailer cleanup, barn rinse-out where you need a real engine and pump but cannot justify a 4000 PSI rig.
Specifications
- Max pressure: 2700 PSI
- Max flow: 3.0 GPM
- Engine: Honda GX200 commercial gasoline, 196cc, 5.5 HP, recoil start
- Pump: Comet triplex plunger, forged brass manifold, ceramic plungers
- Drive: direct, engine-to-pump
- Frame: powder-coated steel B-Frame
- Wheels: 10-inch flat-free
- Fuel tank: 0.825 gallons
- Dimensions: 22.5-inch L x 21-inch W x 22-inch H
- Weight: 95 lb
- Chemical injector: low-pressure (soap), included
- Warranty: 90 days consumer (machine), 3 years engine (Honda), 5 years pump (Comet)
Frequently asked questions
Why pay more for a Honda over an off-brand engine?
Honda GX-series engines are the long-term-value choice on commercial pressure washers because they are easy to start, run quietly, hold their tune longer than budget alternatives, and have parts and service available at any small-engine shop in the country. On a unit you plan to own for years, the engine is what determines whether you are still using it in season five or shopping for a replacement.
Comet vs AAA vs cheap horizontal pump - does it matter?
It matters once you use the machine more than a handful of times a year. Cheap horizontal axial-cam pumps are fine for once-a-summer house wash but fail quickly under daily duty. The Comet triplex on the B2765HC is rebuildable - seal kits, valves, and even the manifold are field-replaceable - and it runs cooler under sustained load. For light-commercial use this pump is the part that justifies the price difference over big-box-store machines.
2700 PSI vs 3000 PSI - is the bump worth it?
For most users, no. The work is GPM-limited, not PSI-limited. A 2700 PSI / 3.0 GPM unit will out-clean a 3000 PSI / 2.4 GPM unit on most jobs because the higher flow rinses faster. If you are buying primarily for paint stripping, oil-stained concrete, or graffiti removal, then yes, step up to 4000 PSI. For everything else, 2700 PSI at 3.0 GPM is the practical sweet spot.
Will it run a surface cleaner?
Yes. The 3.0 GPM flow is enough to spin and feed most 14 to 16-inch rotary surface cleaners. Anything larger (20-inch+) wants 4 GPM or better; for a 14-16 inch surface cleaner the B2765HC is well matched.
How is it shipped?
The B2765HC ships in a single carton via standard ground freight (not LTL pallet freight) for most addresses; oversize-handling fees may apply at the carrier's discretion. Lift-gate is generally not required at this weight class.
What about cold-water versus hot-water - do I want hot?
Cold-water is the right choice for the great majority of pressure-washing work: house wash, deck and fence, autos, concrete in most climates, and general cleanup. You only need hot water if you are removing grease, oils, or sticky food residues - typically restaurant kitchens, fleet undercarriages, and food-processing equipment. Hot-water units cost two to three times more, so do not pay for heat unless you actually need it.
What is the maintenance schedule?
Engine: oil change after the first 20 hours of break-in, then every 100 hours or annually. Pump: pump oil change at 50 hours then every 250 hours. Quick-connects, hose, and gun are field-replaceable. End-of-season: pump-saver antifreeze through the inlet, drain the fuel tank or add stabilizer, store somewhere dry.
About Discount Cleaning Products. We are an authorized BE Power Equipment dealer with US-based customer service. We stock the Honda GX200 service parts and Comet pump rebuild kits that this configuration uses, so when service time comes you are not waiting on a back-order pipeline.
