The Esteam E1200 is a dual-purpose 10-gallon hard surface and carpet extractor built for commercial cleaning contractors who clean both tile and carpet on the same accounts. Tile and grout cleaning specialists, restoration contractors, and large commercial cleaning companies specify the E1200 because the auto-fill, auto-drain, and adjustable 1000 PSI pump combine to produce truck-mount-style production speed on hard surfaces in a portable, single-cord package - and the same machine handles carpet work without buying a second extractor.
Built for
Tile and grout cleaning specialists who run hard surface jobs on restaurants, retail floors, hospital lobbies, and commercial kitchens. The 1000 PSI adjustable pump and 10-gallon recovery capacity scale to the largest single-day jobs that a portable can practically handle.
Restoration and water-damage contractors who need a single machine that handles tile, grout, sheet vinyl, LVT, and carpet on the same job. The E1200 covers the full IICRC water-damage scope on a single piece of equipment.
Large commercial cleaning contractors on accounts with mixed flooring - restaurants with carpeted dining rooms and tiled service areas, retail with carpeted offices and tiled restrooms, healthcare with carpeted patient rooms and tiled corridors. One E1200 handles the full account.
Adjustable 1000 PSI pump
The adjustable plunger pump is the engineering decision that lets the E1200 cover both hard surface and carpet. For carpet, the pump runs at conventional carpet-extractor pressure (well under 200 PSI) to avoid over-saturation. For hard surface, the same pump scales up to 1000 PSI - the pressure range that produces real grout-line cleaning rather than surface-only rinse. The front-mounted pressure adjuster and gauge let the operator fine-tune on the fly without disconnecting hoses.
Auto-fill and auto-drain
Auto-fill connects the solution tank to building water through a standard hose connection so the machine refills itself as the operator works. Auto-drain pumps recovered water through a 50-foot discharge hose at 1800 GPH (30 GPM) so the operator does not stop, dump, and refill. On a large commercial tile job this single feature pair is the difference between one production day and two.
Vacuum recovery
Dual 2-stage vacuum motors deliver 150 inches of water lift. That is enough recovery to handle a high-pressure tile job without trailing water across the floor, and enough recovery to leave a carpet damp-dry on a follow-up carpet pass. The external filter catches debris before it enters the recovery tank, which protects the auto pump-out from clogging on the kind of grout-line debris that comes off a long-neglected restaurant floor.
Body and portability
The roto-molded polyethylene housing weighs approximately 140 pounds with the empty tanks. The E1200 rolls easily on its wheels and is CSA / US approved for commercial use. Length, width, and height are sized to fit through standard commercial doorways without disassembly.
Specifications
Tank: 10 gallon solution / 10 gallon recovery. Pump: adjustable plunger up to 1000 PSI. Vacuum: dual 2-stage, 150-inch water lift. Auto fill and auto drain. Pump-out: 1800 GPH / 30 GPM with 50-foot discharge hose. Weight: approximately 140 pounds. Body: roto-molded polyethylene. Power: 115V. Approval: CSA / US.
Frequently asked questions
Is the E1200 a tile machine or a carpet machine?
Both. The E1200 is engineered as a dual-purpose extractor. The adjustable pump runs from low pressure for carpet work up to 1000 PSI for hard surface tile and grout cleaning, and the dual 2-stage vacuum motors are sized for both applications. Most commercial users run the E1200 as their primary tile machine and use the carpet wand for upholstery and detail work.
How does auto-fill and auto-drain work?
Auto-fill connects the solution tank to a building water supply so the machine refills itself as the operator works. Auto-drain pumps recovered water out through a 50-foot discharge hose at 1800 GPH so the operator does not have to stop, dump, and refill. On a large commercial tile job this is the difference between a one-day and a two-day project.
What pressure should I use for tile and grout?
Most professional tile cleaners run the E1200 between 600 and 1000 PSI for tile and grout, depending on grout condition and chemistry. The front-mounted pressure adjuster and gauge let the operator fine-tune on the fly. Use lower pressure for honed natural stone and higher pressure for heavily soiled glazed ceramic and porcelain.
What hard surface tools does it pair with?
Most operators pair the E1200 with a spinner-style hard surface tool (Hydro-Force Gekko, SX-12, or similar) for tile and grout work, plus a standard carpet wand for carpet and upholstery. The auto pump-out works in line with all common spinner tools.
Is the E1200 portable enough to use upstairs?
At about 140 pounds, the E1200 is heavier than a 6-gallon portable but lighter than a truck-mount slide-in. It rolls easily on its wheels and most crews can lift it up a staircase with two operators. For routine multi-story work, plan for a freight elevator if available.
Discount Cleaning Products is an authorized Esteam dealer. We stock the E1200 along with the matching hard surface spinner tools, hose extensions, replacement vacuum motors, and the Esteam accessory line.
