HydroForce, Hose And Wand Kit For Olympus And Nautilus Portables, M002

The HydroForce M002 hose and wand kit is the factory accessory bundle for Olympus and Nautilus portable carpet extractors - the parts that take the hardest beating in daily route cleaning and need to be replaced or kept on the truck as spares. Carpet cleaning techs and rental shops grab this kit when the original hoses develop kinks, the cuffs leak, or the wand is ready for replacement after a few thousand jobs.

Use Cases

• Replacement hoses and wand for an Olympus or Nautilus extractor
• Spare kit kept on a service truck so a torn hose does not kill a job day
• Rental store inventory for portables that go out and come back beat up
• Janitorial in-house carpet program standardizing on HydroForce portables
• Restoration sub-contractors running multiple machines on a single project

What's In The Kit

The M002 kit ships the hoses and wand HydroForce specifies for the Olympus and Nautilus portable extractor families. The factory hose IDs and cuff sizes are matched to the machine's pump and vacuum specs - aftermarket hoses with off-spec IDs cost you spray pressure and recovery vacuum at the wand.

Specifications

• Hose set: solution and vacuum hoses sized for Olympus and Nautilus pump and motor specs
• Wand: floor wand sized for portable carpet extraction work
• Quick connects compatible with HydroForce Olympus and Nautilus inlet/outlet ports
• Original-equipment replacement - keeps the machine performing to factory spec

Frequently Asked Questions

Will this kit fit other extractors besides Olympus and Nautilus?

The cuffs and quick-connects are sized for HydroForce Olympus and Nautilus portables. They may physically attach to other portables with the same fitting size, but pump and vacuum specs vary - using the wrong-spec hose ID is the most common cause of pressure or vacuum loss. Stick with the kit matched to your machine.

How long should the original hoses last on a daily-use portable?

It depends on storage and route. Hoses kicked under a van seat and dragged across asphalt every day fail faster than hoses coiled and hung. Most full-time route techs replace hoses every 12 to 24 months; rental units burn through hoses faster because the customer rarely treats them gently.

Do I need to replace both the hose and wand together?

Not necessarily. The kit lets you do a full refresh in one box, but if only the hose is damaged you can replace just that part. Many shops keep the M002 kit on the shelf as a complete spare so they can swap the failed item and re-stock the rest as backup.

Does this fit the older Olympus/Nautilus models or just current production?

The HydroForce Olympus and Nautilus design has been stable for years - this kit fits the standard production runs. If you have an unusually old or rebuilt unit, confirm the inlet/outlet thread or quick-connect size before ordering.

Discount Cleaning Products is an authorized HydroForce dealer carrying the full Olympus and Nautilus parts line - hoses, wands, pumps, and vacuum motors. Our US-based team helps you spec the right replacement when your portable starts dropping pressure or vacuum.