Pure water and a brush handle ordinary dirt. What it does not handle is baked-on grime, bird mess, sap, hard water film and the grey film that builds on ground-floor glass in a traffic-heavy location. Those need mechanical agitation, and that is what this attachment adds. The IPC Eagle BSTB10-HD pairs a 10-inch back scrub T-bar with a heavy duty scrub sleeve, mounting on the back of the brush head so you can flip from a normal wash to aggressive scrubbing without changing tools or coming down off the pole.
The sleeve is the working part: an all-white scrub pad on the outer face for cutting into stubborn soil, backed by an inner microfiber fabric that holds liquid so the pad stays wet through the scrub. Together that gives a wet scrub rather than a dry drag, which is what keeps the pad cutting soil instead of grinding it across the glass. It fits almost any T-bar and is safe on glass, awnings, stainless steel and most flat surfaces.
For pure water crews the practical value is route speed. Instead of dropping the pole, walking back to the van for a scrubber, and re-rinsing, the aggressive pad is already on the tool - one flip and the difficult pane gets handled in the same pass as the easy ones.
Built for
- IPC Eagle Ultra Pure window cleaning systems
- Window cleaning contractors on commercial storefront and ground-floor routes
- First-clean and post-construction jobs with heavy soil
- Facilities dealing with hard water film, sap or bird mess on glass
- Crews who also clean awnings, stainless and flat panel surfaces
Use cases
- Stubborn soil on commercial glass - baked-on grime and traffic film that a standard brush and pure water will not lift.
- First cleans and post-construction glass where years of buildup or construction residue has to come off before a normal maintenance wash makes sense.
- Bird mess, sap and insect residue that has dried onto the pane.
- Awnings and stainless steel - safe on flat non-glass surfaces, so the same tool covers the whole storefront.
- Hard water and mineral film on sprinkler-affected ground-floor glass.
Specifications
- Size: 10 inch back scrub T-bar with HD sleeve
- Outer face: all-white aggressive scrub pad
- Inner fabric: microfiber, holds liquid for a wet scrub
- Mounting: back scrub position, fits almost any T-bar
- Safe on: glass, awnings, stainless steel and most flat surfaces
- System: IPC Eagle Ultra Pure window cleaning system
- Part number: BSTB10-HD
Frequently asked questions
What does the back scrub position actually do for me?
It puts the aggressive pad on the reverse side of the brush head, so an operator can wash normally and then flip the tool to scrub a difficult pane without swapping heads or coming down off the pole.
Is the HD sleeve safe on glass?
Yes, it is designed for glass as well as awnings, stainless steel and most flat surfaces. As with any aggressive pad, keep the surface wet, use even pressure, and test an inconspicuous area first on coated or tinted glass.
Why does the sleeve have a microfiber inner layer?
The microfiber soaks and holds liquid so the outer scrub pad stays wet through the pass. A wet pad cuts soil; a dry one drags it across the glass.
Will it fit T-bars other than IPC Eagle?
The HD sleeve is made to fit almost any T-bar. The BSTB10-HD assembly is built for the IPC Eagle Ultra Pure system - send us your setup and we will confirm before you order.
Is the sleeve replaceable on its own?
Yes. The sleeve is the wear item and is stocked separately, so you replace the sleeve rather than the whole T-bar as it wears out.
Do I still need chemicals with this?
Usually no. The point of the HD sleeve on a pure water system is to add mechanical action instead of chemistry, so the finish stays residue-free.
Discount Cleaning Products is an authorized dealer for this line, with US-based support staff who work with these machines every day. If you are not certain this is the right part or size for your equipment, contact us before you order and we will confirm compatibility against your model number.
