HOT-2-GO Hot Water Pressure Washer 3500/3.0 305cc Pull Start SH35003VH


Hot2Go SH35003VH gas hot water pressure washer, 3500 PSI 3.0 GPM with 305cc Vanguard engine
 
Alternative Views:


📊 AI-POWERED MARKET ANALYSIS
Highlight: Commercial hot-water pressure washer by Hot-2-Go — heavy-duty cleaning power
Best For: Grease removal, food plants & restaurant cleaning
Expert Note: Hot water cuts grease 40% faster than cold alone — the standard for kitchen exhaust, fleet wash, and food facility sanitation.
Sale Price: $4,455.12
Estimated Shipping Cost: Free Shipping Item


Free Shipping
Product Code: SH35003VH
Quantity:

Description Reviews FAQ
 

The Hot2Go SH35003VH is a gas-powered, diesel-fired hot water pressure washer built for contractors who fight grease and baked-on grime, not just surface dirt. Its pull-start 305cc Vanguard engine drives a triplex pump at 3500 PSI and 3.0 GPM, while a thermostatically controlled burner heats the water to as high as 250F. Because it runs on gas rather than line power, the SH series goes wherever the work is - fleet yards, job sites, farms, and loading docks where no electrical hookup is available.

Built for hot, heavy-duty cleaning

Hot water is the difference-maker on greasy and oily jobs, and this machine is sized for daily commercial use. Operators rely on it to:

  • Degrease trucks, trailers, heavy equipment, and engine bays in fleet and transportation work.
  • Cut animal fat, food grease, and grime in restaurants, food processing, and commercial kitchens.
  • Strip oil and built-up film from concrete pads, shop floors, and industrial equipment.
  • Clean agricultural equipment, barns, and pens where caked-on organic soil resists cold water.

A rugged powder-coated frame with a lift point, integrated hose hooks, and a big pneumatic wheel kit keeps it portable and ready to move around the site.

Specifications

  • Pressure / flow: 3500 PSI at 3.0 GPM
  • Engine: pull-start 305cc Vanguard (commercial gas engine)
  • Pump: triplex plunger pump
  • Heat: thermostatically controlled 12 VDC Beckett diesel burner, water up to 250F
  • Coil: stainless-steel-wrapped 1/2-inch SCH 80 steel heating coil
  • Fuel tank: 8.0 gallon for extended burner run time
  • Includes: gun/wand, 50 ft high-pressure hose, quick-connect nozzles, adjustable thermostat, pneumatic wheel kit
  • Size: 44 in L x 28 in W x 45 in H; requires group 24 / 550 CCA battery (not included)
  • Optional: downstream injector for hot soap application

Frequently asked questions

Why use a hot water pressure washer instead of cold?

Heated water breaks down grease, oil, and baked-on grime far faster than cold water and detergent alone. The SH35003VH heats water to as high as 250F, which is why it is chosen for degreasing fleets, kitchens, and equipment where cold washers struggle.

What engine and pump does the SH35003VH use?

It is powered by a pull-start 305cc Vanguard engine driving a triplex plunger pump rated at 3500 PSI and 3.0 GPM. The Vanguard is a commercial engine built for long daily run times.

How is the water heated?

A thermostatically controlled 12 VDC Beckett diesel burner heats a stainless-steel-wrapped 1/2-inch SCH 80 steel coil. An 8.0 gallon fuel tank gives extended burner run time on the job.

Does it come ready to use?

The machine ships with a gun and wand, a 50-foot high-pressure hose, quick-connect nozzles, an adjustable thermostat, and a pneumatic wheel kit. It does require a group 24 / 550 CCA battery, which is not included, to run the burner system.

Can it run soap or reach steam temperatures?

An optional downstream injector lets the operator apply hot soap from the gun, and the burner system can bring output up to steam-range temperatures for the toughest grease and grime.

Discount Cleaning Products is an authorized Hot2Go / Hydro-Tek dealer with US-based support. Whether you are comparing hot water output, pump configuration, or burner options across the SH series, our team can help you match the right machine and accessories to your cleaning application.

Features
  • 3500 PSI / 3.0 GPM triplex pump driven by a pull-start 305cc Vanguard gas engine
  • Thermostatically controlled diesel burner heats water up to 250F for grease and grime
  • Stainless-steel-wrapped 1/2-inch SCH 80 heating coil for durability
  • 8.0 gallon fuel tank for extended burner run time
  • Includes 50 ft hose, gun, wand, quick-connect tips, and a pneumatic wheel kit
  • Rugged powder-coated frame with lift point and integrated hose hooks



MK Diamond MK-30, 18" x .125" x 1" Supreme Grade Blades for Acid & Hard Brick # 128660 $265.99
Miele Chrome Telescopic Wand w/Slot 35mm Replacement $14.32
Sandia 10-0859-I Vacuum Hose for SX-12 $6.77
Microfiber Cleaning Cloths, Yellow, 16x16, Pack of 60 $38.99