On a water-fed pole system the sleeve is the only thing that actually touches the glass, and it is the part that wears out. The IPC Eagle T80183 heavy-duty replacement scrub sleeve is the 10-inch replacement for the HD scrub brush and back-scrub T-bar used on IPC Eagle Ultra Pure window cleaning systems, so a worn or contaminated sleeve does not take the whole tool out of service.
It is a two-material construction, and the combination is the point. The outer face is a white scrub pad that gives you the abrasion needed to break stubborn soil loose. The inner layer is microfiber, which holds the liquid so the pad stays wet through the stroke instead of dragging dry across the glass. Wet scrubbing is what keeps grit moving off the surface rather than grinding into it.
Built for
- Ground-level and pole-reach window work. Storefronts, entryways and low-rise glass on a water-fed pole route.
- Stubborn soil the brush alone will not lift. Bug residue, sprinkler spotting, pollen film and traffic grime.
- Awnings and stainless steel. Safe on glass, awnings, stainless steel and most flat surfaces, so one tool covers the whole storefront.
- Routes where sleeves get dirty fast. Keeping a clean spare on the truck means you never carry grit from one job to the next window.
- Replacing worn OEM parts. This is the factory IPC Eagle replacement, sized correctly for the 10-inch HD scrub tool.
Getting the most life out of a sleeve
Two habits make a real difference. Rinse the sleeve out at the end of a job rather than letting soil dry in the microfiber, because dried grit is what turns a scrub pad into a scratch risk. And rotate two sleeves rather than running one to failure, so there is always a clean one on the pole while the other dries. Sleeves are consumable; treating them as such is much cheaper than a glass replacement claim.
Specifications
- IPC Eagle part number T80183
- Heavy-duty replacement scrub sleeve, 10 in.
- White scrub pad outer face with inner microfiber layer
- Microfiber inner holds liquid for wet scrubbing
- Fits the IPC Eagle 10-inch HD scrub brush and back-scrub T-bar accessory
- For use with IPC Eagle Ultra Pure water-fed pole window cleaning systems
- Safe on glass, awnings, stainless steel and most flat surfaces
Frequently asked questions
What does this sleeve fit?
It is the 10-inch heavy-duty replacement sleeve for the IPC Eagle HD scrub brush and back-scrub T-bar accessory used with Ultra Pure water-fed pole window cleaning systems. If you are matching it to a specific pole or tool, contact us with your model and we will confirm the fit before you order.
Will it scratch glass?
Used wet and kept clean, it is intended to be safe on glass. The risk with any scrub pad is trapped grit, so rinse the sleeve after each job and replace it once the pad face is worn or contaminated.
Can I use it on surfaces other than glass?
Yes. It is safe on glass, awnings, stainless steel and most flat surfaces, which makes it useful for cleaning the whole storefront rather than only the windows.
Why is there microfiber inside the pad?
The inner microfiber soaks up and holds cleaning liquid so the pad stays wet through the scrub stroke. A dry pad drags and is far more likely to move grit across the glass rather than lift it off.
How often should I replace it?
Replace it when the scrub face is visibly worn, matted or holding embedded grit that will not rinse out. Most professional route cleaners rotate two sleeves and replace them as consumables.
Discount Cleaning Products is an authorized dealer with US-based product support. Our team works with professional cleaners, restoration contractors and facility crews every day, so if you are not sure whether this is the right fit for your equipment or your accounts, call or email us before you order and we will help you match it correctly.
