The BE Pressure HW4015RA is a professional hot water pressure washer built for crews that fight baked-on grease, oil, and stubborn grime every day. Delivering 4,000 PSI at 4.0 GPM with water heated to 200 degrees F, it gives fleet managers, contractors, and facility maintenance teams the heat and force needed to strip away contaminants that cold-water units simply push around.
Built for heavy-duty cleaning
Hot water transforms degreasing work. Where a cold-water washer relies on pressure alone, the HW4015RA combines 4,000 PSI with adjustable heat to melt and lift oil, grease, and road film. That makes it a workhorse for the toughest jobs.
- Truck, trailer, and heavy-equipment fleet washing
- Oil-field service, machinery yards, and trucking depots
- Concrete and shop-floor degreasing
- Agricultural and construction equipment cleaning
- Large facility and grounds maintenance
Engine, pump, and heating
A Powerease 420cc engine with electric start drives a commercial AR Triplex pump (RSV4040) through a compact direct-drive connection. The pump features a die-cast body, forged brass manifold, ceramic-coated plungers, and a thermal release valve for long service life under hard use. A 12V Beckett diesel burner heats water on demand, controlled by an adjustable thermostat up to 200 degrees F, and can be switched off to run cold when heat is not required.
Frame and portability
The powder-coated steel roll-cage frame protects components while keeping controls accessible for daily operation and maintenance. Four 13-inch flat-free tires handle rough terrain, a built-in lift point allows crane loading, and integrated mounting brackets let the unit be installed permanently on a truck or trailer. A 12-inch oil drain hose and a brass air fitting for blowing water out of the coil make winterizing and routine service faster and cleaner.
Specifications
- Pressure: 4,000 PSI
- Flow: 4.0 GPM
- Engine: Powerease 420cc with electric start
- Pump: AR Triplex RSV4040, direct drive
- Burner: 12V Beckett diesel, up to 200 degrees F, approx. 300,000 BTU
- Diesel tank: 7 gallon; battery: 55AH AGM marine
- Tires: four 13-inch flat-free; powder-coated steel roll-cage frame
- Included: 50 ft high-pressure hose, spray gun and wand, five nozzles
Frequently asked questions
What surfaces is the BE HW4015RA hot water pressure washer best for?
It is built for the heaviest grease and grime work: truck and equipment fleet washing, oil-field and machinery yards, concrete degreasing, agricultural equipment, and large facility maintenance. The 200 degree F hot water cuts through baked-on oil and grease that cold water alone leaves behind.
How hot does the water get and how is it heated?
A 12V Beckett diesel burner heats the water up to 200 degrees F (93 C) with roughly 300,000 BTU of output. An adjustable thermostat lets you dial the temperature down or shut the burner off to run as a cold-water washer when heat is not needed.
What engine and pump does it use?
A Powerease 420cc engine with electric start drives a commercial-grade AR Triplex pump (model RSV4040) through a direct-drive connection, delivering a steady 4,000 PSI at 4.0 GPM. The pump has a die-cast body, forged brass manifold, ceramic-coated plungers, and a thermal release valve.
Can it be mounted on a truck or trailer?
Yes. The powder-coated steel roll-cage frame includes a built-in lift point for crane loading and mounting brackets so the unit can be bolted onto a truck, trailer, or skid after removing the wheels.
What is included with the HW4015RA?
It ships with a 50-foot high-pressure hose, a spray gun and wand assembly, five quick-connect spray nozzles, a 7-gallon diesel tank, and a 55AH AGM marine battery for the electric start.
Discount Cleaning Products is an authorized BE Power Equipment dealer with US-based customer support to help you match the right hot water pressure washer to your operation. View BE warranty details.
