ChipBuddie Universal Dust Shroud for Lead Paint and Popcorn Ceilings

Alternative Views:

📊 AI-POWERED MARKET ANALYSIS

• Highlight: Dust containment system — captures airborne particles at the source during cutting and grinding

• Best For: Concrete cutting, renovation & OSHA-compliant dust control

• Expert Note: Source-capture dust control meets OSHA silica-dust Table 1 requirements — prevents costly fines and protects worker health on every job.

Sale Price: $38.39

Estimated Shipping Cost: $31.25

Product Code: 61005

Quantity:

Description

Reviews

FAQ

ChipBuddie Universal Dust Shroud for Lead Paint and Popcorn Ceilings

The ChipBuddie is a vacuum scraper intended for use on lead paint chips and popcorn ceilings.This tool meets EPA regulations for removal of lead paint when used with a certified HEPA vacuum.The tool uses two-way razor blades to scrape, while the top and sides suck pieces down into your vacuum.If you feel the blade is becoming dull, simply unscrew the blade and invert it to use the second side of the blade.The ChipBuddie will fit directly to any 1.25” hard hose end, or with the included adapter hose will fit most standard wet dry vacuums at 2.25”.For full suction, we recommend a vacuum with 125 CFM (cubic feet per minute) of air flow.Included is (1) ChipBuddie, (3) two-way razor blades, and (1) 18” Adapter Hose.

Click Here for Manual

Features

Captures 98% of popcorn ceiling material as it is dislodged
Fits most models of vacuums with 1.25" hose ends or adapters
Vacuum slots on both sides of scraper blade collect as you scrape
Safe for lead paint removal when used with a certified HEPA vacuum
Secondary filter is the smaller filter which goes underneath the primary filter
90-Day Limited Warranty
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

	Perfect Products 16" HEPA Upright Vacuum with Magnet and Ergonomic Handle $469.95
	Ventamatic Cool Attic 1080CFM Roof Galvanized Mill # CX1000AM $129.40
	Edco Chisel Scaler 2' Straight Steel Air Powered 24" Length ALR-2 C10309 $1,010.22
	Bissell 12" Heavy Duty Upright Vacuum, with On-Board Tools $485.25
	Edco Axle Shaft 3/4"DIA. X 12-3/16"L, 65014 $25.19
	Microfiber Cleaning Cloths Blue 12x12 60 Cleaning Towels (5 Dozen) $57.35
	Windsor Blue Sensor Switch SR12 SR18 S12 WI-532 $30.08
	BE Pressure B4013HAAS Pressure Washer 4000 PSI 4.0 GPM Gas Cold Water $1,267.00
	Edco 40280 Concrete Power Trowel Blades DISCONTINUED TRY WX-611F $80.85