Does this chain fit the CD-35 only?

Yes. The EDCCHAIN35 is the OEM 35 cm replacement chain specifically for the EDCO CD-35 electric concrete chainsaw. It is not a universal chain and will not fit wood-cutting saws or other concrete saw platforms.

Can I cut wood with this chain?

No. This is a concrete chain with diamond-segmented cutters. Cutting wood with a concrete chain damages the cutters and is not what they are designed for.

How long does a chain typically last?

Service life depends on how aggressive the aggregate is and how clean the cut. On standard structural concrete a contractor can expect a meaningful number of linear feet per chain, but cutting through hard rebar, river rock, or older high-PSI concrete shortens life. Many contractors keep two chains on hand and rotate.

Is sharpening possible?

Concrete chains are typically replaced rather than re-sharpened. The diamond segments are consumed in service and the chain is run until cut speed drops below acceptable, then swapped for a fresh OEM chain like the EDCCHAIN35.

What lubrication does this chain need?

Follow the EDCO CD-35 manual for chain lubrication and water-flush requirements. Concrete chainsaws typically run with water flush both to cool the chain and to keep the kerf clear of slurry.

EDCO EDCCHAIN35 Replacement Chain (For Electric Chainsaw)

EDCO EDCCHAIN35 35 cm 14 inch OEM replacement chain for EDCO CD-35 electric concrete chainsaw

📊 AI-POWERED MARKET ANALYSIS

• Highlight: Professional surface preparation tool by Edco — built for heavy-duty surface prep

• Best For: Flooring contractors & concrete restoration crews

• Expert Note: EDCO equipment is the industry benchmark for surface preparation — from light grinding to aggressive coating removal.

Sale Price: $528.52

Estimated Shipping Cost: Free Shipping Item

Product Code: EDCCHAIN35

Quantity:

Description

Reviews

FAQ

The EDCO EDCCHAIN35 is the genuine 35 cm (14 inch) replacement chain for the EDCO CD-35 electric concrete chainsaw. When your existing chain is dull, stretched, or missing teeth, swapping in the OEM EDCCHAIN35 keeps cut quality and cut speed where the saw was rated, instead of guessing with a generic substitute that was never built for diamond-aggregate concrete cutting.

Built for

Concrete cutting contractors running the EDCO CD-35 electric chainsaw
Plumbing and HVAC trades cutting precise concrete openings for pipe and chase work
Demolition crews making controlled rectangular openings in walls and slabs
Rental yards keeping CD-35 fleet machines ready to dispatch

Why an OEM chain matters on concrete

Concrete chainsaws are a different animal from wood chainsaws. The cutter geometry, link spacing, and drive sprocket fit are all built around the abrasive cutting action of diamond-segmented teeth on aggregate. Cutting crews on concrete contractor forums consistently warn against running a non-OEM chain on a CD-35: a wood-cut chain that loosely fits the bar will eat the sprocket and risks throwing under load. The EDCCHAIN35 is the factory chain spec for the CD-35 platform.

Specifications

Bar length: 35 cm (approximately 14 inches)
Application: concrete chainsaw chain (not for wood-cutting saws)
Compatibility: EDCO CD-35 electric concrete chainsaw
Type: OEM replacement chain
Use: precision concrete openings, plumbing and conduit chases, controlled demolition

Frequently asked questions

Features

Restores cut speed and finish quality on the EDCO CD-35 electric concrete chainsaw
Cuts 35 cm (14 inch) bar length matched to the OEM CD-35 spec
Designed for diamond-segmented concrete cutting, not wood
Maintains drive sprocket life by matching factory chain pitch and gauge
Keeps rental and contractor CD-35 fleets ready for dispatch
Authorized EDCO dealer with US-based parts support

	Little Giant High Pressure Propane Water Heater - 120,000 BTU $3,125.40
	Carpet Extractor Sanitaire SC6095A 9 Gallon Self Contained 18 inch 100 PSI, SC6095A $2,062.99
	Edco 73400 CPU-10FC Self Propelled Scarifier, Gasoline, 20 HP Honda $13,798.24
	HydraMaster ODORMATE TROPICAL BREEZEGeneral Purpose Odor Eliminator, Deodorizer and Cleaning Additive, 4 x 1 gal. case, 950-200-B $116.00
	Hinged Cover for M4420 $135.71
	GUNK Hold-Zit Strap Bulk 22", Case/50, # R722B $220.00
	Windsor Sensor Exhaust Filter fits Models SRS12, and SRS15. Windsor Part Number WI-2846, 2846 $18.69
	Delmhorst HT-4000, Stand-Alone, Thermo-Hygrometer, $520.00
	TPI Fan Forced Garage/Shop Heater HF5840TC $289.95