When the hose that came with your pressure washer cracks, leaks at the fitting, or simply will not reach the far side of the job, the Simpson 41114 Armor Hose gets you back to work. This is a 50-foot replacement and extension hose built for contractors and serious homeowners who run hot or cold water machines and need a line that shrugs off drags across concrete, gravel, and rough decking. Rated for both heated and cold water use, it is the upgrade that turns a short, stiff factory hose into a genuinely usable length you can move around a house, a fleet vehicle, or a job site.
Built for
- Replacing a worn, leaking, or burst factory hose on a commercial gas pressure washer
- Extending your reach so you can wash second-story siding, long driveways, and RVs without dragging the machine
- Hot-water cleaning jobs such as degreasing, fleet washing, and grease-heavy flatwork where water temperatures run high
- Auto detailing, deck and fence restoration, and general property maintenance that pulls the hose over abrasive surfaces
- Any machine using standard 3/8-inch quick connect fittings rated up to 4500 PSI
Specifications
- Model: Simpson Armor Hose 41114 (in-store model 41095)
- Length: 50 feet
- Inner diameter: 3/8-inch
- Maximum pressure: rated up to 4500 PSI
- Water compatibility: hot and cold water, built for temperatures up to 250 degrees Fahrenheit
- Construction: dual-braided steel over polyester with an opaque polyurethane outer jacket that is flexible, non-marring, and abrasion resistant
- Fittings: 3/8-inch male quick connect plug by 3/8-inch female quick connect socket
- Bend protectors: 4-inch strain reliefs at both ends to reduce wear near the couplers
- Certification: CETA CCS certified accessory
- Warranty: 90-day limited accessory warranty
Frequently asked questions
Will this hose fit my pressure washer?
It is designed to fit most commercial gas pressure washers that use standard 3/8-inch quick connect fittings and are rated up to 4500 PSI. Check that your machine has 3/8-inch quick connect couplers before ordering, and confirm your unit's pressure rating does not exceed 4500 PSI.
Can I use it with hot water?
Yes. The Armor Hose is hot and cold water compatible and is built for high-temperature applications up to 250 degrees Fahrenheit, which makes it suitable for degreasing and other hot-water cleaning work.
Is this a replacement hose or an extension hose?
Both. Because it uses male and female quick connect ends, you can install it as a direct replacement for a damaged factory hose or add it on to your existing hose to gain extra reach.
What makes the Armor Hose more durable than a standard hose?
It uses dual-braided steel over polyester for strength under pressure, wrapped in a polyurethane outer jacket that resists abrasion and will not mark surfaces. The 4-inch bend protectors at each end also reduce kinking and wear where hoses usually fail first.
Does the length reduce my cleaning pressure?
The 3/8-inch inner diameter is sized to maintain flow across the full 50 feet, so you get the reach of a longer line without the pressure loss and surging that thinner hoses can cause.
Discount Cleaning Products is an authorized US dealer for Simpson pressure washer equipment and accessories, offering US-based service and support to help you match the right hose to your machine. Buy the genuine Simpson 41114 Armor Hose with confidence, backed by real people who know the product.