The Hydro-Force Injectimate Grout Sealing Kit gives tile and grout cleaning contractors, restoration companies, and janitorial crews a precise, trigger-controlled way to apply water-based grout sealer without the drips, oversaturation, and hand fatigue that come with brush-on application. Paired with the Hydro-Force Injectimate sub-surface injection sprayer (sold separately), the kit feeds sealer straight into the grout line through a brush tip and stops the instant the trigger is released, cutting waste, wiped-up overspray, and rework on every job. For crews who already offer tile and grout cleaning, it turns grout sealing into a fast, repeatable add-on service instead of a slow, messy hand-brushing chore.
Use Cases / Best For
- Post-cleaning grout protection - seal grout lines immediately after professional tile and grout cleaning to lock in results and extend the time before grout needs deep cleaning again.
- Countertop and backsplash grout - use the 4-inch tube to seal kitchen and bath grout in tight spaces without kneeling or straining.
- Standing floor application - the 3-foot extension tube lets techs seal large floor areas without crouching over every line, speeding up whole-room jobs.
- Restoration follow-up - reseal grout as part of water-damage or mold-remediation punch lists once surfaces are clean and dry.
- Janitorial and facilities maintenance - maintain grout in high-traffic commercial restrooms, kitchens, and locker rooms on a routine sealing schedule.
Specifications
- Kit Contents: 4-inch application tube, 3-foot extension tube, 3 application brushes, instruction sheet
- Applicator Type: Trigger-fed tube-and-brush applicator, designed for use with the Hydro-Force Injectimate sub-surface injection sprayer (sold separately)
- Compatible Sealants: Water-based grout sealers
- Floor Reach: 3-foot tube for standing application on floor grout
- Detail Reach: 4-inch tube for countertop, backsplash, and wall grout
- Flow Control: Sealer stops dispensing when the trigger is released, reducing drips and overspray
- Manufacturer: Hydro-Force
Frequently Asked Questions
How does the Injectimate Grout Sealing Kit work?
The kit's brush-tipped tubes attach to the Hydro-Force Injectimate sprayer. Squeeze the trigger and sealer feeds through the brush directly onto the grout line; release the trigger and the flow stops, so the applicator isn't still dripping or pooling sealer while you reposition between lines.
What sealants can I use with this kit?
The kit is built for water-based grout sealers. Check your specific sealer's label for compatibility with brush and injection-style applicators before use, and test on a small area first if you're unsure.
Does it work on both floors and countertops?
Yes. The 3-foot extension tube is made for standing application on floor grout, and the shorter 4-inch tube gives you close, controlled access for countertop, backsplash, and wall grout.
How easy is cleanup after use?
Because the kit is designed for water-based sealers, the brushes and tubes rinse clean with water when flushed promptly after each job, which helps the applicator brushes hold their shape and last through repeat use.
Will it work on textured or matte grout?
Yes. The brush tip is designed to work sealer down into rough or textured grout lines rather than sitting on top of the surface. As with any application method, wipe away excess sealer from the surrounding tile before it dries to avoid haze or streaking on matte or honed finishes.
Discount Cleaning Products is an authorized dealer of Hydro-Force equipment and supplies. Shop our full line of grout sealing, tile and grout cleaning, and restoration tools to outfit your crew with the same equipment trusted by cleaning and restoration professionals nationwide.
