A powerhead earns its keep through the brush, and the brush is a wear part. Vacuum technicians give a simple field test: when the bristles no longer reach past the bottom face of the housing, the brush has stopped agitating and is just riding along. From that point the machine still sounds healthy and still picks up surface litter, but the carpet stops looking groomed and soil starts building in the pile.
The Sandia 10-0164-C is the OEM replacement brush for the 10-0164 powerhead, the powered carpet head Sandia offers for its Raven 6-quart and 10-quart backpack vacuums. In a heavy commercial route - nightly carpet in offices, schools, hotels and healthcare corridors - a brush is generally considered a scheduled replacement rather than a failure, on roughly a two-year cycle for a machine in daily use. Swapping the brush is dramatically cheaper than replacing the powerhead.
Built for
- Scheduled maintenance on a powerhead that has been in daily commercial service
- Restoring groomed appearance on cut-pile carpet that has started to look flat and dull
- Fleet refresh before an inspection or a new contract start
- Fixing a powerhead that still runs but no longer lifts pile or pulls embedded soil
Why crews order this part
- Returns full agitation to a powerhead that still has a good motor - the repair costs a fraction of a replacement head
- OEM bristle length and mounting, so the brush sits at the height the housing was designed around
- Turns a slow decline in cleaning quality into a scheduled part swap you can budget for
Specifications
- Sandia service part for the 10-0164 Powerhead Kit
- 10-0164 Powerhead Kit includes the wand, electrical fittings and vacuum head
- Listed by Sandia as an accessory for both the Raven 6-quart and 10-quart backpack vacuums
Sandia Warranty Policy
Sandia is committed to deliver the best quality, and our products are covered by a comprehensive warranty.
- 2-year warranty on all vacuum motors
- 2-year warranty on 100 psi pumps only. 1-year warranty on all other pumps
- 90-days on parts, tools, and accessories.
Frequently asked questions
How do I know when to replace the brush?
The standard check is bristle height: with the powerhead upside down, the bristles should still extend past the bottom edge of the housing. When they sit flush or below it, the brush is no longer agitating the carpet.
Is this the brush only or the full assembly?
This part is the replacement brush. If you need the complete brush assembly instead, that is Sandia 10-0164-E.
Which machines use the 10-0164 powerhead?
Sandia lists the 10-0164 Powerhead Kit as an accessory for the Raven 6-quart and 10-quart backpack vacuums.
How often should a commercial crew change it?
There is no fixed interval, but crews running carpet nightly commonly plan on a brush change about every two years and inspect bristle height at each filter change.
Discount Cleaning Products is an authorized Sandia dealer. We stock the Raven backpack line and its service parts together, so the part you order is the OEM part that matches the machine rather than a generic substitute, and our US-based team can help you confirm the right number off your parts list before you order.