Sandia 10-0806-2 2" Grey Hose Barb Fitting for Extractor

Sandia 10-0806-2 2-inch Grey Hose Barb Fitting for Extractor
 
📊 AI-POWERED MARKET ANALYSIS
Highlight: 2-inch grey hose barb fitting for Sandia extractors — molded to match factory hose ID for leak-free recovery line connections.
Best For: Service techs replacing brittle or pulled-out barbs on Sandia recovery lines where hose ID won't seat on a generic fitting.
Expert Note: Always replace the matching hose clamp when swapping a barb — old clamps fatigue at the screw threads and won't reach factory torque on a fresh fitting.
Sale Price: $19.92
Estimated Shipping Cost: $16.25


Product Code: 10-0806-2
Quantity:

Description Reviews FAQ
 
Sandia 10-0806-2 2" Grey Hose Barb Fitting for Extractor
Features
Sandia Warranty Policy

• 2-year warranty on all vacuum motors
• 2-year warranty on 100 psi pumps only. 1-year warranty on all other pumps
• 90-days on parts, tools, and accessories

Note: This warranty does not cover, and shall not be liable for, defects or failures resulting from
improper, or lack of maintenance, misapplication, misuse, tampering with or substitution of
provided parts. Additionally, this warranty does not cover pump stored in freezing conditions,
pump run for extended time with no water, use of powdered detergent, failure to clean system
regularly with vinegar solution. Filters removed from solution tank. Pumps with inline filters not
cleaned regularly.
Sandia covers up to one (1) year of service labor at the manufacturer’s calculated hourly labor rate/repair
time when performed by a manufacturer-authorized service provider. Ultimately, labor reimbursement costs
are at the discretion of the manufacturer. At no time is the manufacturer responsible for travel time to
complete on-call repairs. After one (1) year, the original retail purchaser is responsible for all labor costs
with no manufacturer reimbursement.
Authorized warranty replacement parts need to come directly from the manufacturer. Any use of any other
parts will void warranty. The manufacturer does not reimburse for parts used by client that were not
supplied directly for the machine under warranty.
The client must contact the manufacturer prior to working on or changing out of any parts, etc. Do not
send parts or equipment back to the manufacturer without an RMA Number and approval. No labor will be
paid for, nor parts cost paid for or reimbursed, that have not previously been approved by the manufacturer.
All warranty work must be approved and authorized to qualify, and appropriate warranty procedures must
be followed.
The warranty starts on the purchase date by the original purchaser from an authorized distributor, subject
to proof of purchase. If proof of purchase cannot be identified, the warranty start date is ninety (90) days
after the date of sale to the authorized distributor.



Panasonic Toner And Drum Unit KX-FA75 $211.03
Euro-Pro Shark Fantom Paper Vacuum Bags, Upright EP704/704H/SHF 9PK $14.99
Agent Halt Soft Wash Salt and Bleach Post-Wash Neutralizer, 5 Gallon Bottle $101.25
Microfiber Telescopic Aluminum Mop Handle, 48" to 72", TELEHAN $10.99
Proteam 104500 Wire Brace, 1500XP $2.98
Smoke & More Heavy Duty Odor Neutralizer - Lemon, 4 - 1 Gallon Bottles $106.65
MK Diamond MK 1" (25mm) Crown Bit For Prestressed & Precast Concrete, Coring Drilling # 157010 $67.99
EDCO Sliders Tool Box Kit for TG-10 (Hard) -18 Grit Dyma-Segs (6), 30 grit Dyma-Dots (6), 30 grit Dyma-Arrows Left (6), PCD w/ Backing Left (6) $1,591.00