Home > Carpet Extractors > PSI > 100 PSI >

Sandia Sniper 12 Gallon Carpet Extractor, 100 PSI Pump, 3 Stage Fan with In-line Heat 80-3100-H

Sandia Sniper 12 Gallon Carpet Extractor, 100 PSI Pump,
 
Alternative Views:


Sale Price: $1,674.00
Estimated Shipping Cost: Free Shipping Item



Availability: Direct Ship From Manufacturer
Product Code: 80-3100-H


Add Hose and Wand:


Add Upholstery Tool:


Quantity:
Description Frequently Asked Questions
 
Sandia Sniper 12 Gallon Carpet Extractor, 100 PSI Pump, 3 Stage Fan with In-line Heat 80-3100-H

Combines a demand-type 100 psi solution Pump and heavy-duty, dual 3 stage vacuum motor system for superior cleaning results and faster drying time. Fully portable, constructed of lightweight rotational molded polyethylene for maximum strength and maneuvers on large rear wheels and 3 inch double ball bearing casters. Large, 12-gallon capacity solution and recovery tank, 12 inch cleaning path and tank overflow protection. 12 Gallon Carpet Extractor, 100 PSI Pump, 3 Stage Fan with In-line Heat 80-3100-H

Features
  • Heater Heats Solution Up To 205 Degrees
  • 100 psi
  • 12 Gallon Solution Tank and a 12 Gallon Recover Tank
  • Large Stair Climbing Wheels
  • Top Mounted Control Panel
  • Two Powerful 3-Stage Vacuum Motors, 15.5 Amp, Dual Stack 1.5 inch tubes
  • 170 inches of Waterlift - 100 cfm air flow
  • 2-25 Foot Power Cords

Sandia Warranty:

Sandia products have...
• 2-year warranty on all vacuum motors
• 2-year warranty on 100 psi pumps only. 1-year on all other psi pumps
• 90-days on components, parts, tools, and accessories.

Note: This warranty does not cover, and shall not be liable for, defects or failures resulting from
improper, or lack of maintenance, misapplication, misuse, tampering with or substitution of
provided parts. Additionally, this warranty does not cover pump stored in freezing conditions,
pump run for extended time with no water, use of powdered detergent, failure to clean system
regularly with vinegar solution. Filters removed from solution tank. Pumps with inline filters not
cleaned regularly.
Sandia covers up to one (1) year of service labor at the manufacturer’s calculated hourly labor rate/repair
time when performed by a manufacturer-authorized service provider. Ultimately, labor reimbursement costs
are at the discretion of the manufacturer. At no time is the manufacturer responsible for travel time to
complete on-call repairs. After one (1) year, the original retail purchaser is responsible for all labor costs
with no manufacturer reimbursement.
Authorized warranty replacement parts need to come directly from the manufacturer. Any use of any other
parts will void warranty. The manufacturer does not reimburse for parts used by client that were not
supplied directly for the machine under warranty.
The client must contact the manufacturer prior to working on or changing out of any parts, etc. Do not
send parts or equipment back to the manufacturer without an RMA Number and approval. No labor will be
paid for, nor parts cost paid for or reimbursed, that have not previously been approved by the manufacturer.
All warranty work must be approved and authorized to qualify, and appropriate warranty procedures must
be followed.
The warranty starts on the purchase date by the original purchaser from an authorized distributor, subject
to proof of purchase. If proof of purchase cannot be identified, the warranty start date is ninety (90) days
after the date of sale to the authorized distributor.


Other People Purchased
Vacuum Hose Assembly for Sandia Sniper 12 Gallon Carpet Extractor 80-0503 Sandia 25 Ft Solution Hose Assembly with 1/4 in. Female and Male Quick Disconnects for Sandia Sniper 12 Gallon Carpet Extractor #80-0502. S-Shaped Stainless Steel Wand 12" Wide 2 Jets for Sandia Sniper 12 Gallon Carpet Extractor 10-0861A Sandia Stainless Steel 4" Wide Upholstery Tool, (Required for Machines with Heat), 10-0501
Sale Price: $57.81

Add
Sale Price: $98.80

Add
Sale Price: $245.00

Add
Sale Price: $128.56

Add
Vacuum Hose Assembly for Sandia Sniper 12 Gallon Carpet 25 Foot Solution Hose Assembly with 1/4 in. Female and Male Quick Disconnects for Sandia Sniper 12 Gallon Carpet Extractor #80-0502 S-Shaped Stainless Steel Wand 8 Wide for Sandia Sniper Stainless Steel Hand Tool 4 Wide Sandia Sniper Carpet

 5 of 5 5 of 5 Total Reviews: 1 Write a Review or Ask a Question.

  0 of 0 people found the following review or question helpful:
 
5 of 5 First time buyer April 3, 2012
: Anonymous Person from Chicago, Illinois  
Great price. Fast shipping. Product arrived in great condition. Very pleased!!!!!

Was this review helpful to you?