The BE Pressure HPFK-2014VR is a 2-inch high-pressure fire-fighting pump kit built on a 408cc Briggs and Stratton Vanguard commercial engine, delivering 140 GPM with 304 feet of discharge lift and 26 feet of suction lift - 330 feet of total lift. The right pump for wildfire defense, ranch and farm pond firefighting, brush-burn control, and rural water staging where municipal hydrant service is not an option.
Why a 2-inch commercial pump for fire defense
Rural property fire-defense systems and wildland fire crews specify 2-inch high-volume pumps for one reason: gallons-per-minute matters more than pressure when you are protecting a structure or knocking down a brush fire. 140 GPM is enough to feed a roof-and-perimeter sprinkler array sized to wet a small house and 50 feet of defensible space, or to support a hand-line crew working a brush fire from a stock pond. The Vanguard commercial engine starts after months of sitting unused - which is the critical reliability requirement for emergency pumps that may not be exercised for an entire dry season.
Use cases
- Rural property wildfire defense - stage at a pond or cistern, run distribution piping to roof and perimeter sprinklers.
- Ranch and farm fire response - portable pump for stock-tank or pond water source feeding hand lines.
- Brush-burn control - water supply for prescribed-burn perimeter wetting.
- Construction site water staging - dust control, compaction water supply, emergency response.
- Disaster-response water transfer - moving floodwater, pond water for stock animals, emergency water to structures.
Specifications
- Model: HPFK-2014VR (BE Pressure 2-inch Fire Fighting Pump Kit)
- Flow: 140 GPM
- Pressure: 143 PSI
- Suction lift: 26 feet
- Discharge lift: 304 feet
- Total lift: 330 feet
- Engine: Briggs and Stratton Vanguard, 408cc, commercial-duty
- Connection: 2-inch supply
Frequently asked questions
What is a fire-fighting pump kit used for?
Wildfire defense around remote property, stock-tank and pond firefighting, brush-clearing burn control, and water-supply staging where municipal hydrant service is not available. The HPFK-2014VR puts 140 GPM of water through a 2-inch supply line with 304 feet of discharge lift - enough to push water from a pond up a hill to a fire line or a structure-defense sprinkler array.
What does 'Vanguard engine' mean in pump kit naming?
Vanguard is Briggs and Stratton's commercial-duty engine line - the 408cc unit on the HPFK-2014VR is rated for daily-use commercial work, not the consumer-grade engines that come on lawn equipment. Vanguard is what wildland fire crews and ag operators specify because it starts on demand after sitting unused for months.
How far can the pump push water uphill?
Specification is 304 feet of discharge lift (vertical distance from pump to discharge point) and 26 feet of suction lift (vertical distance from water source to pump). Total lift is 330 feet. Real-world hose friction reduces these numbers; plan installation with friction-loss tables for your specific 2-inch hose run.
Is this kit suitable for a sprinkler defense system?
Yes - 140 GPM is enough to feed a sprinkler array sized to wet down a structure and a defensible perimeter. Many rural property owners stage one HPFK kit at a pond or cistern feeding distribution piping to roof and perimeter sprinklers as part of a wildfire-defense plan. Coordinate sprinkler design with a fire-defense system installer.
Does the kit include hoses and fittings?
The HPFK-2014VR is the pump and engine assembly. Suction hose, discharge hose, foot valve, strainer, and nozzles are typically sold as additional accessories matched to your installation. Call us and we will spec the kit components for your application.
Discount Cleaning Products is an authorized BE Pressure dealer. Call for matching suction and discharge hose, foot valves, strainers, and nozzles to complete your fire-defense pump installation.