The EDCO 59600 Magna-Trap Dual-Disc 230V Electric Floor Grinder is a 22-inch, 3 HP single-phase grinder built for indoor concrete preparation work where gas and propane fumes are not an option. Two counter-rotating magnetic discs grind level, run smooth, and accept the full Magna-Trap accessory family (Dyma-Serts, Strip-Serts, polishing pads) so a single machine handles mastic removal, paint and epoxy stripping, light leveling, and pre-polish surface prep.
Built for
Indoor warehouse and retail concrete prep, polished concrete surface preparation, mastic and adhesive removal, paint and epoxy coating removal, light concrete leveling, garage and showroom floor prep, and any indoor jobsite where 230V electric is the only acceptable power source.
Why counter-rotating dual discs
Single-disc grinders pull to one side and exhaust the operator. The Magna-Trap's counter-rotating discs cancel side pull, giving the operator straight-line tracking and the ability to grind one-handed for long stretches. This is the difference between completing a 500 sq ft warehouse cell in a single shift versus fighting the machine all afternoon.
EDCO Leveling System
EDCO's exclusive Leveling System adjusts machine height across the disc accessory range - Dyma-Serts for general grinding, Strip-Serts for coating removal, polishing pads for prep work. Level grinding is quicker, smoother, easier on the operator, and significantly extends accessory life by keeping the cutting surface flat to the floor.
Specifications
- Working width: 22 inches
- Motor: 3 HP, 230V single-phase
- Discs: 2 counter-rotating magnetic multi-accessory discs
- Productivity: 400-500 sq ft per hour at 1/32-inch with Dyma-Serts
- Weight tray: accepts up to 80 lbs of additional weight for aggressive grinding
- Dust control: Heavy-duty Velcro Dust Shroud for vacuum attachment
- Accessories: Compatible with full Magna-Trap accessory family
Frequently asked questions
Do I need 230V to run the 59600?
Yes. The 59600 is the 230V single-phase model. EDCO also offers a 115V version of the Magna-Trap Dual-Disc grinder if your facility doesn't have 230V available - but the 230V model has more grinding power for the same chassis.
What accessories should I order?
For routine surface prep, start with Dyma-Serts in 20-grit, 35-grit, and 100-grit. For coating removal, add Strip-Serts. For polishing prep, add the appropriate polishing pads. The Magna-Trap accessory family is interchangeable across the EDCO grinder line.
Do I need a dust vacuum?
For OSHA Silica compliance on any concrete grinding, yes - pair the 59600 with a HEPA dust extractor rated for the silica generated. The Velcro Dust Shroud accepts standard EDCO vacuum hose connections.
Can I use the 59600 outdoors?
Yes, on a generator that provides clean 230V power. The 59600's electric design makes it equally usable indoors or out, unlike gas-powered alternatives that can't run indoors.
How does it compare to a single-disc grinder?
A single-disc grinder is lighter, less expensive, and easier to maneuver in tight areas. The 59600's dual-disc design is the right choice when you need straight-line tracking, more grinding width per pass, and the ability to use weight tray ballast for aggressive work.
Discount Cleaning Products is an authorized EDCO dealer. The 59600 ships from EDCO with factory warranty support, and our US-based customer service team can help match Dyma-Serts, Strip-Serts, polishing pads, and HEPA dust extractors to your specific surface prep program.