The HydroForce Gekko Wand AR51A is the backbone of the Gekko hard-surface cleaning system, built for carpet cleaners and restoration contractors who are adding tile and grout work to their service list. The stainless steel tubing, adjustable handle, swivel head, and second Ergo grip let one technician run high-pressure hard-surface jobs all day without the wrist and shoulder fatigue of a fixed wand. Pair it with the Gekko or SX-7 head that matches the job - the threaded collar swaps heads in seconds.
Use Cases
Professionals on industry forums consistently describe the Gekko system as the tool they reach for in corners, along walls, on countertops, and for blasting individual grout lines. Typical applications include:
- Restaurant and commercial kitchen tile and grout cleaning with fast-drying recovery
- Residential bathroom and entryway tile where a large spinner tool cannot reach
- Edge, corner, and coving detail work when paired with the AR51C edge head
- Topical sealer and heavy soil removal at higher PSI where spinner tools struggle
- Countertop and vertical surface cleaning using the smaller 4-inch heads
Technique matters as much as the tool on hard surfaces. Forum veterans describe working room edges first with the 4-inch edge head, then switching to the brush or squeegee head for the field, and finishing by tracing individual grout lines with the wand angled low so the jet drives soil toward the vacuum slot. Because the AR51A meters solution and recovers water in the same pass, grout dries quickly enough to walk shortly after cleaning - a selling point your customers will notice. The vacuum relief lets you fine-tune lift on delicate surfaces such as soft natural stone, and the swivel head keeps the tool flat on the floor through direction changes instead of breaking seal. If you already run an SX-7 or SX-15 spinner, this wand is the missing piece that turns it into a complete hard-surface system rather than a one-tool setup.
Specifications
700 to 2,000 PSI operating range; 1.5-inch stainless steel tubing; adjustable primary handle plus Ergo secondary handle; swivel head with vacuum relief; integrated solution line and hose; threaded collar connection. Head sold separately.
Connects to: AR51C 4-inch Gekko Edge, Corner and Coving Head; AR51D 4-inch Gekko Head; AR51E 14-inch Gekko Squeegee Head; AR51H 14-inch Gekko Brush Head; AR51G SX-7 Spinner Tool; AR51S Gekko SX-15 Head.
Care is simple: flush the solution line with clean water after acid-side or high-alkaline jobs, and check the head collar threads for grit before swapping tools so the seal seats cleanly.
Frequently Asked Questions
Does the AR51A include a cleaning head?
No. The AR51A is the wand, solution line, and hose only. Choose the Gekko or SX-7 head that matches your work - edge, brush, squeegee, or spinner heads all attach with the same threaded collar.
What pressure does the Gekko wand run at?
It is rated for 700 to 2,000 PSI, which covers most truckmount and high-pressure portable setups used for tile and grout cleaning.
Will it work with my truckmount or portable extractor?
Yes. The wand connects to standard solution and vacuum lines. Cleaners on TruckMount Forums use the Gekko system on both truckmounts and portables; with a portable, stay within your machine's pressure range.
Why choose a Gekko wand over a spinner tool alone?
Spinner tools cover open floor quickly, but the Gekko wand with edge and brush heads handles corners, walls, baseboards, and individual grout lines a spinner cannot reach. Many pros run both on the same job.
Discount Cleaning Products is an authorized dealer with US-based customer service. Our team has supplied facility managers, janitorial companies, and cleaning contractors for decades, and we are happy to help you confirm fit or compatibility before you order.