The EDCO 26100 is the electric GMS-10 hardscape and paver saw, a 1.5 HP table-style masonry saw that cuts interlocking pavers, stepping stones, brick, and stone veneer with a 10-inch dry diamond blade. Electric power and a patented dust-control vacuum system make it the choice for hardscape crews who cut indoors, in enclosed courtyards, or anywhere engine exhaust and airborne silica are a problem.
Built for
- Hardscape and paver contractors - precise straight cuts on pavers and retaining-wall block at the jobsite.
- Masons and stone installers - clean cuts on brick, block, and stone veneer for tight-fitting work.
- Indoor and enclosed sites - electric power means no exhaust where a gas saw cannot run.
- Dust-sensitive jobs - the standard dust-control vacuum system captures silica dust on dry cuts.
Electric power with dust control
Running on standard 115/230V single-phase power, the GMS-10 turns a 10-inch blade at 3,450 RPM and cuts up to 4 inches deep. A shock-mounted motor platform damps vibration for straighter, cleaner cuts, while the rolling table locks to the tray to guide material through the blade. The patented dust-control vacuum system is standard for dry cutting, and a hose hookup lets you wet-cut when you prefer to suppress dust with water.
Specifications
- Power: electric, 1.5 HP, 115/230 V single phase, 14/7 A, 3,450 RPM
- Blade: 10-inch dry-cutting diamond blade included
- Max cutting depth: 4 in
- Dimensions: 43 in L x 24 in W x 37 in H (on cart)
- Weight: 131 lb
- Dust control: patented vacuum system standard for dry cutting
- Wet cutting: hose hookup included
- Table: rolling table locks to tray; shock-mounted motor platform
- Cuts: interlocking pavers, stepping stones, brick, stone veneer
Frequently asked questions
Why choose the electric GMS-10 over a gas hardscape saw?
Electric power produces no exhaust, so the 26100 can run indoors, in enclosed courtyards, and in tight spaces where a gas saw is not safe, while still cutting pavers and stone with a 10-inch blade.
What can it cut and how deep?
It cuts interlocking pavers, stepping stones, brick, and stone veneer up to 4 inches deep with the included 10-inch dry diamond blade.
Does it control dust?
Yes. A patented dust-control vacuum system is standard for dry cutting, and a hose hookup is included so you can wet-cut to suppress dust with water when conditions call for it.
What power does it require?
The saw runs on 115/230V single-phase power, drawing 14 amps at 115V or 7 amps at 230V, with a 3,450 RPM 1.5 HP motor.
How does it produce clean, straight cuts?
A shock-mounted motor platform damps vibration and a rolling table locked to the tray guides the material evenly into the blade, which together yield straighter, cleaner cuts than a handheld saw.
Discount Cleaning Products is an authorized EDCO dealer with US-based customer service to help you match the right saw, blade, and accessories to your work.