The BE Pressure 85.300.044 Ball Valve Kit gives pressure washer operators instant on and off flow control right at the gun, hose, or accessory, without shutting down the machine. With 3/8-inch quick-connect fittings on both the inlet and outlet, it drops into a professional setup in seconds and lets an operator stop water flow, swap a tip, nozzle, or hose, and resume work, saving time on every changeover.
Use cases
Pressure washing contractors, fleet washers, and equipment rental operations install this ball valve so a technician can isolate flow to switch wands, surface cleaners, chemical injectors, or hoses mid-job. It is equally useful on cold and hot water machines, and the quick-connect ends make it a fast addition to an existing gun-and-hose assembly. The high pressure and temperature rating means it holds up to demanding daily commercial washing.
Specifications
- Fittings: 3/8 inch quick connect on inlet and outlet
- Pressure rating: high-pressure rated for professional pressure washers
- Temperature rating: suitable for cold and hot water (up to about 180 F)
- Seals: chemical- and heat-resistant internal seal and O-ring
- Function: instant on/off flow control at the gun, hose, or accessory
Frequently asked questions
What does the ball valve kit do?
It provides instant on and off water flow control at the gun, hose, or accessory so the operator can stop flow and change tips or hoses without shutting down the pressure washer.
What size are the fittings?
The kit uses 3/8 inch quick-connect fittings on both the inlet and outlet for fast installation into a standard pressure washer assembly.
Can it be used with hot water?
Yes. It is rated for both cold and hot water pressure washing, with heat- and chemical-resistant seals for long service life.
Discount Cleaning Products is an authorized dealer with US-based customer service ready to help you confirm the right part or product for your equipment.