The solution hose is the line that carries cleaning solution from the spotter's pump out to the hand tool, and on a portable spot extractor it is dragged across carpet, kinked around furniture legs and coiled up wet at the end of every job. The Sandia 10-0475 is the genuine 7-foot solution hose for Sandia spotters — the exact hose that Sandia's own 2-gallon machine parts list and hand tool drawings call out, so the quick disconnects and cuffs mate the way the factory intended.
Built for
- Replacing a kinked, split or leaking 7 ft solution hose on a Sandia 2- or 3-gallon spot extractor.
- Restoring solution flow to a 4 in. hand tool or stainless upholstery tool.
- Carpet cleaners, auto detailers and restoration techs who run a spotter daily.
- Rebuilding a used spotter where the original hose has hardened with age.
How the 7 ft hose fits the Sandia spotter system
Sandia's hoses and hand tool parts breakdown shows the 10-0475 solution hose working alongside the 7-foot black vacuum hose (50-1007), black slip hose cuffs (10-0463) and a 1/8 in. female quick disconnect (10-0474) on the clear-view and stainless hand tool assemblies. Sandia also sells the same hose family in internal and external routing versions and in a 15 ft. configuration, which is why matching the part number rather than eyeballing a length matters when you order.
Getting the most life out of a solution hose
Two habits do most of the work. First, follow Sandia's maintenance instruction to flush the machine periodically — running diluted vinegar through the pump and lines, then flushing with clean water, prevents the mineral deposits that clog lines and pumps. Second, coil the hose in wide loops rather than tight wraps; the memory kink that forms where a hose is folded is where it eventually splits.
Specifications
- Manufacturer: Sandia Products (Ultimate Solutions)
- Part number: 10-0475
- Length: 7 feet
- Type: Solution hose for spotter
- Application: Sandia 2- and 3-gallon Spot Extractor hand tool assemblies
- Sandia warranty on tools and accessories: 90 days
Sandia's published equipment warranty covers a lifetime on the machine body, two years on vacuum motors and pumps, one year on heaters and electrical components, and 90 days on tools and accessories. Warranty replacement parts must come directly from the manufacturer.
Frequently asked questions
Is the 10-0475 the solution hose or the vacuum hose?
It is the solution hose. Sandia lists the 7-foot black vacuum hose separately as 50-1007. Most hand tool assemblies use both, so check which one on your machine has failed.
Does this hose come with the quick disconnect fitted?
The 10-0475 is the hose itself. Sandia lists the 1/8 in. female quick disconnect (10-0474) and the brass male quick disconnect (10-0402) as separate parts. If you want the hose supplied complete, look at the 10-0475-COM.
Will this fit a machine with heat?
Sandia's heated machines use a different hand tool and hose arrangement, including 1/4 in. quick disconnects and a 15-foot hose set. Confirm against your machine's parts list, or send us the model and serial number.
Why did my old hose harden and crack?
Age, heat and mineral buildup all stiffen a solution hose. Sandia recommends a periodic diluted vinegar flush followed by a clean water flush to keep lines and pump free of mineral deposits.
Discount Cleaning Products is an authorized Sandia Products dealer. We stock genuine Sandia service parts, not generic substitutes, and our US-based staff can help you confirm the right part number against your machine's model and parts list before you order. Using genuine Sandia replacement parts also keeps your machine's factory warranty intact, since Sandia states that use of non-manufacturer parts voids future warranty coverage.