Home > Carpet Extractors > PSI > 500 PSI >

Sandia Sniper 12 Gallon Carpet Extractor 500 PSI 3 Stage Fan 80-3500 (without heat)

Sandia Sniper 12 Gallon Carpet Extractor 500 PSI 3 Stag
 
Alternative Views:


Sale Price: $2,300.00
Estimated Shipping Cost: Free Shipping Item



Availability: Direct Ship From Manufacturer
Product Code: 80-3500


Add Hose and Wand:


Add Upholstery Tool:


Quantity:
Description Frequently Asked Questions
 
Sandia Sniper 12 Gallon Carpet Extractor 500 PSI 3 Stage Fan 80-3500 (without heat)

Powerful vacuum motors offer up to 205" water lift for efficient solution recovery that results in better extraction and faster carpet drying. High performance motors stay cool with an innovative air intake design that uses the vacuum's own cooling fans to pull cool, outside air over the motors, reducing motor temperature and preventing overheating.12-gallon solution and recovery tanks allow for quick and easy fill and dump disposal, reducing downtime. Waist-high controls prevent bending and stooping to operate the machine. The controls are recessed in the machine and stay protected during use, in transit or in storage. 10" non-skid, non-marking wheels make stair climbing easy and do not scuff floors. Roto-molded polyethylene tanks withstand the toughest working environments and resist dents, chips and cracks. Includes 25-foot long safety power cord(s).

Carpet Extractors dispense water, either hot or cold, into a carpet at various rates called PSI (Pounds per Square Inch). The higher the PSI, the more water output into carpet. The solution hose dispenses the water and the vacuum hose sucks the water out of the carpet. Ultimate Solutions offers a variety of PSI and vacuum pump choices to meet the needs of your specific job.

100CFM

Manual
Features
  • #80-3500
  • Motors: Dual 3-Stage
  • Pump: 500 PSI (adjustable, select 100, 200, 300, 500)
  • 100CFM
  • Cords: (2) 25-Foot
  • Heat: No
  • Weight: 131 lbs.
  • Vac Power: Up to 205" Water Lift

Sandia Warranty:

Sandia products have...
• 2-year warranty on all vacuum motors
• 2-year warranty on 100 psi pumps only. 1-year on all other psi pumps
• 90-days on components, parts, tools, and accessories.

Note: This warranty does not cover, and shall not be liable for, defects or failures resulting from
improper, or lack of maintenance, misapplication, misuse, tampering with or substitution of
provided parts. Additionally, this warranty does not cover pump stored in freezing conditions,
pump run for extended time with no water, use of powdered detergent, failure to clean system
regularly with vinegar solution. Filters removed from solution tank. Pumps with inline filters not
cleaned regularly.
Sandia covers up to one (1) year of service labor at the manufacturer’s calculated hourly labor rate/repair
time when performed by a manufacturer-authorized service provider. Ultimately, labor reimbursement costs
are at the discretion of the manufacturer. At no time is the manufacturer responsible for travel time to
complete on-call repairs. After one (1) year, the original retail purchaser is responsible for all labor costs
with no manufacturer reimbursement.
Authorized warranty replacement parts need to come directly from the manufacturer. Any use of any other
parts will void warranty. The manufacturer does not reimburse for parts used by client that were not
supplied directly for the machine under warranty.
The client must contact the manufacturer prior to working on or changing out of any parts, etc. Do not
send parts or equipment back to the manufacturer without an RMA Number and approval. No labor will be
paid for, nor parts cost paid for or reimbursed, that have not previously been approved by the manufacturer.
All warranty work must be approved and authorized to qualify, and appropriate warranty procedures must
be followed.
The warranty starts on the purchase date by the original purchaser from an authorized distributor, subject
to proof of purchase. If proof of purchase cannot be identified, the warranty start date is ninety (90) days
after the date of sale to the authorized distributor.


Other People Purchased
Sandia Stainless Steel Dual Jet Wand Kit with 25' Vacuum and Solution Hoses, 80-0500 Vacuum Hose Assembly for Sandia Sniper 12 Gallon Carpet Extractor 80-0503 Sandia 25 Ft Solution Hose Assembly with 1/4 in. Female and Male Quick Disconnects for Sandia Sniper 12 Gallon Carpet Extractor #80-0502. Sandia Stainless Steel 4" Wide Upholstery Tool, (Required for Machines with Heat), 10-0501
Sale Price: $360.60

Add
Sale Price: $57.81

Add
Sale Price: $98.80

Add
Sale Price: $128.56

Add
Sandia 80-0500 Stainless Steel Dual Jet Wand Kit with 25' Vacuum and Solution Hoses Vacuum Hose Assembly for Sandia Sniper 12 Gallon Carpet 25 Foot Solution Hose Assembly with 1/4 in. Female and Male Quick Disconnects for Sandia Sniper 12 Gallon Carpet Extractor #80-0502 Stainless Steel Hand Tool 4 Wide Sandia Sniper Carpet
Sandia Sniper 12 Gallon, 38.8 amps Commercial Carpet Extractor Adjustable 500 PSI Pump Dual 3-Stage with Heat 80-3500-H
Sale Price: $2,800.00

Add
Sandia Sniper 12 Gallon Commercial Carpet Extractor Adjustable 500 PSI Pump Dual 3-Stage with Heat 80-3500-H

Share your knowledge of this product with other customers... Be the first to write a review or ask a question