When a water-fed crew loses its booster pump, the whole day stops. This is the 1/2 HP motor Tucker specifies as the replacement for the motor in its 110V Booster Pump System and its 110V Skid Mount and Wall Mount Fill N Go systems, so a window cleaning, solar or soft-wash operation can put a humming, tripping or thermally cut-out pump back to work for a fraction of what a replacement system costs.
Built for
- Booster pump repair. The pump motor hums, will not spin, trips the GFCI or runs hot and shuts down on overload, and the pump head itself is still good.
- Fill N Go service. Skid Mount and Wall Mount Fill N Go owners who need the motor Tucker built the system around rather than a general-purpose pump motor.
- Shelf spare for production crews. Operations running a single purification system keep one on hand so an outage is an hour, not a week.
- Fleet standardization. Multi-van operations keeping every 110V Tucker system on the same service part.
Why the genuine motor matters here
Pure-water gear is unforgiving of substitutions. The motor and pump head in a Tucker system are paired for water purification duty, and dealers in the trade consistently warn that general-purpose pumps with cast-iron internals can rust and push that rust downstream into a purification system worth several times the pump. Buying the motor Tucker lists for the system keeps that pairing intact.
A word on diagnosis before you order: if the motor spins but the system makes no water, the most common cause reported by working cleaners is not the motor at all but a starved inlet, usually a supply hose that is too long or kinked. Shorten and straighten the inlet first. Electrical symptoms, not flow symptoms, are what point at the motor.
Specifications
- Rating: 1/2 HP
- Supply: 110V
- Length: 10 inches
- Weight: 20 lbs
- Cooling: blows air out rather than circulating it through the interior, which limits contamination
- Fits: Tucker 110V Booster Pump System; Tucker 110V Skid Mount and Wall Mount Fill N Go
Tucker warranty information
Frequently asked questions
What does the Tucker 12023 motor fit?
Tucker lists this 1/2 HP motor as the replacement motor for the Tucker 110V Booster Pump System and the 110V Skid Mount and Wall Mount Fill N Go systems.
Will it work on a Tucker 12V boost or delivery pump?
No. The 12V boost pump and the 12V delivery pump are separate products with their own motors. This motor is for the 110V equipment only.
Is this the complete pump or just the motor?
This is the motor only. The pump head and housing are separate service parts.
How do I tell whether the motor failed or the pump did?
Motor symptoms are electrical: it hums but will not turn, it trips the GFCI, or it runs hot and cuts out on thermal overload. If the motor runs but no water moves, the usual cause is inlet starvation from a long or kinked supply hose, or the pump head itself.
Why keep a spare motor on the shelf?
On a water-fed crew the purification system is the only water source. A spare motor turns a multi-day outage into a bench swap.
Discount Cleaning Products is an authorized Tucker dealer. We stock the water-fed pole systems, pumps and service parts professional window cleaning and solar crews actually run, and our US-based team can help you confirm the right part before you order.